Antler Pump & Motor Corporation

571 Timpson Place Bronx, NY 10455

Phone: 212-534-2500

Contact us on email!

Schedule a Service

Schedule a Service

Last time to book first morning appointments (8.30am) is noon of prior day.

Last available booking time for each day is 2.30. otherwise, please select a time at least 18 hours in advance of current time or press the “click to call” button below to talk with a Antler customer service rep now to inquire about earlier times or in case of emergencies.

Antler Pumps Terms & Conditions

Scheduling. We can only guarantee the first appointment of the day; techs leave our office by 8:30am and should arrive at your building within 30-60 minutes, based on traffic and your location. We try to schedule in two hour increments throughout the day (after our first/8.30 am appointments). We can usually predict our arrival time accurately, but there are occasions where we might run late/early and will try to communicate this with you.

What you can do to prepare (and save you time & money). Clean out any area in which we might be working. Notify the building authority (e.g. “Super”) of our arrival, especially if we need special access. Ensure we’ve access to the apartment(s) above yours (if you have any ceiling leaks). Have information on-hand (e.g. model number) at our arrival for any electrical equipment you feel is malfunctioning or broken.

Insurance/License. We are a fully insured and New York City licensed Pump, Air Compressor & Electric Motor service company. Please notify us prior to dispatching a technician should your building require an insurance certificate.

Billing policy: Our services for repairs are charged on a time and material basis. Our hourly rate is $180.00 per hour + applicable tax. This rate includes travel to your home (capped at one hour), parking, all labor required to complete the work and any necessary trips to a plumbing specialty shop to pick up non-stocked items. There is a one (1) hour minimum for all service calls even if no work is completed. Nights (i.e., after 4:00pm) and weekend service calls are billed at $270.00 per hour, including travel time.

Warranty. We maintain a warrantee period of thirty (30) days for all labor related to the work we completed. All parts installed are warranted by manufacturer. We reserve the right to charge for the labor to replace any part or fixture that must be replaced in the manufacturer’s warrantee period.

Payments. At the completion of the service call we require payment in full, including applicable taxes. Payments can be made by cash, check or credit card. You will receive a sales receipt at the end of the service call indicating all applicable charges. A formal invoice will follow in the mail indicating any additional material costs along with a copy of the credit card receipt, should you prefer payment by credit card.

By clicking below and submitting, you are acknowledging you have read, understood, and agree to these terms. An Antler customer rep will call you within a few minutes of submitting this acknowledgement.

Click to Call

Our Purpose

At Antler, we’ve always been obsessed with building and fixing things to help others.

We like making things work, and work better for our customers. “We” means our colleagues, family and friends; including our long-term Customers.

David

Everything (and anything) Antler offers serves the Professional “Fixer”, powering their tools and equipment, providing more energy for more work, enhancing their inputs to provide their customers with superior output. Which is why Antler has been the “go to” professional pump and motor company for New York City’s buildings (and builders!), for over 73 years.

So, our Purpose is to enable Professional Fixers to do more work- better- and more easily, to have more time to focus on Craft and less on working towards crafting. This is Antler’s “Why”.

Now that it’s been adopted by the Omnia Mechanical Group, aka “the portfolio of Excellence” we plan on expanding Antler’s service area and brand word of mouth well beyond the city for its next 73 years.

Who

If you’ve come to this site, or live in New York City, you probably have heard something about Antler Pumps, but check out the About Us Page if you want to go deep. Antler has been the preeminent New York blue-chip professional electric pump and motor brand for over 70 years and has grown from serving local tradesmen to tens of thousands of companies throughout all the boroughs of New York City and Tri-State Area.

Sales with (Real) Service

We stock only leading manufacturers of electric motors, fans, blowers, water pumps, air compressors, controls, and related equipment for our Products, and offer Services from custom machine work to dynamic balancing, and electric motor rewinding. For more information, please see our Product or Service sections below.

(For other service types, from Plumbing to Electrical, just click on one of our other service brands logos at the top left of this page. We can take care of almost any building-system/mechanical headache for you).

Services

We have the technical knowhow and skills to fix any electric pump or industrial motor you have, and can install or reconfigure any of the products we list below, to make your new equipment use as easy as the click of a button. Our expert technicians can help keep your equipment performing at top efficiency for years to come. If your equipment can not be repaired on-site, we will transport it to and from our repair facility.

Please click on a specific service below to learn more.

New Installations

Antler sells and ships products throughout the U.S., so our economies of scale means our prices are hard to beat. But even if you don’t buy an Antler product, we can install your new motor, pump or fan quickly, efficiently, and with the highest expertise- the right the first time.

Rebuilding

Antler has more than 70 years of pump and motor repair and rebuild expertise. This and other machining needs are met with our in-house machine shops and motor repair capabilities. Because our services are local, we can complete repairs in days, not weeks.Service Includes:

  • Pickup and delivery of repaired and rebuilt equipment
  • Thorough inspection before repair
  • Comprehensive, modern repair facilities that provide a wide variety of services, including boring, machine sleeves, metal spraying, and epoxy coating
  • Component rebuilding and replacement
  • Impeller and/or rotor balancing
  • Available services after repair to maintain your equipment, including reliability and power services

Dynamic Balancing Services

Antler has a dedicated Balancing team of trained Technicians and Engineers. Depending on the application and conditions, balancing can be done at your site or in our shop.
We offer dynamic balancing services to correct the most common cause of premature failure in rotating machinery. Unbalance is caused by the uneven distribution of mass around the axis of rotation. If you repair a machine, replace bearings, or perform other service and still experience noise and vibration, you are most likely experiencing imbalance. Our on-site field balancing services are for in-service equipment at your facility, whereas our shop balancing services are for components that can be brought to our shop.

This includes production balancing on new components prior to being installed by a manufacturer, and various rotors that may have been removed for repair. We can balance almost every type of rotating component. Our balancing machines have state of the art measuring systems and computerized print-out capability to document the balancing process and the final result.
We have the capacity to balance parts weighing under one ounce up to 2,000 pounds. All balancing is performed to the industry standard for the application and part supplied, under ISO standards.

Emergency Repairs

As business owners, we understand that you often can’t wait to have your pump, motor or compressor repaired, you need it –or your customers need their work done- now. So we offer emergency service throughout the five boroughs and –now- Westchester (new!). When you need emergency service, we have the tools, parts and people to complete the repair quickly. Our friendly, focused and knowledgeable technicians get your work done right so that you can get back to work.

Air Compressor Repairs

Our technicians work on all types of air compressors and deliver accurate and thorough work on every service call. In addition to installations and repairs on air compressors, we also offer maintenance contracted hydrostatic tank tests. And we can customize a maintenance contract to suit your business. We perform hydrostatic tank tests in accordance with the New York City Fire Department.

Pump Repairs

From new pump installations to repairing pumps to rebuilding pumps to maintaining pumps, our professionals have the experience to handle all your pump needs. We know the ins and outs of heating pumps, water booster pumps, sewage ejector pumps, and more. That’s part of why Antler’s earned the NY Metro nickname: “The Pump Guys”.

Products

We carry a large selection of electric motor and electric motor-related parts, and our pumps range from (electric motor) to air and hydraulic driven pumps for standard and specialty needs. We also stock fans and blowers and other accessories for related industrial, commercial, and residential applications.

Please click on a specific product category below to learn more.

Electric Motors

Electric Motors

As an authorized and certified distributor of the biggest motor manufacturers, Antler can meet your electric motor needs. We deal in only the best quality motors that are manufactured in the USA, Germany and Japan. Serving all types of industries, our company has one major goal – your ultimate satisfaction! We sell all makes and models of electric motors.

Fans & Blowers: Rooftop and Fresh Air

Fans & Blowers: Rooftop and Fresh Air

Rooftop Fans. Select from a wide range of fan and blowers for commercial, institutional and industrial roof installations. There are products for exhaust, supply, recirculate, filtered, process and gravity applications. These products use two styles of fans direct drive, used where maintenance access is difficult, or belt drive, which allows adjustment of fan speed for system balancing. Fresh Air Fans. Supply air fans, intake fans, supply fan and make-up air blowers are used for situations where fresh and or clean make-up air needs to be replaced at a faster rate than standard ventilation, that is with excess exhaust creating (negative) pressure. Sometimes a particular static pressure must be present in the area to meet certain requirements.

Air Compressors

Air Compressors

We Carry a Wide Selection of air compressors. From Contractor and Commercial to Consumer and Industrial Air Compressors, we have what you’re looking for. Suitable for garages, body shops, workshops, small manufacturing and light engineering applications.

Pumps

We offer electric motor, air, & hydraulic driven pumps for standard and specialty needs. In fact, Antler’s nickname is “The NYC Pump Guys” based on our breadth and depth of products and service capabilities that we’ve built and grown over the last 70 years. We are experts at identifying old or discontinued pumps and determining the modern equivalent unit.

Pump Controls

Pump Controls

Pump controls keep tabs on how each of your heavy-duty pumps is running and whether your system is operating at your required flow rate. Monitor pumps with a required flow rate by incorporating a flow sensor and pump switches. Select a flow switch to redirect liquids to your backup pump when the flow rate drops. Keep pumps from running dry by monitoring the fluid levels in tanks using a float switch, flowmeter or other pump controls.

Condensate Pumps

Condensate Pumps

Condensate pumps are used to pump the condensate (water) produced in an HVAC (heating or cooling), refrigeration, condensing boiler furnace, or steam system. More specifically, condensate pumps may be used to pump the condensate produced from latent water vapor in any of the following gas mixtures:

  • Conditioned (cooled or heated) building air
  • Refrigerated air in cooling and freezing systems
  • Steam in heat exchangers and radiators
  • The exhaust stream of very-high-efficiency furnaces

Submersible/Ejector Pumps

Submersible/Ejector Pumps

Ejector Pumps are designed to handle raw sewage and solid waste materials. These pumps are normally used to push raw sewage to a septic tank, aerobic treatment system, or gravity sewer main. Submersible/Ejector Pumps have a 2” or 3” discharge and can handle up to 2” spherical solids.

Circulator Pumps

Circulator Pumps

Energy Efficient circulators (small in-line pumps) for hydronic heating, potable water recirculation (plumbing), and solar thermal applications. Circulators are cast iron or lead-free bronze constructed with oil lubricated, wet rotor or dry rotor bearings.

Cooling Tower Pumps

Cooling Tower Pumps

The cooling tower water circulating pumps are critical to the chiller systems they serve. Your chilled water system may even have more than one type of chill water pump, with a primary pump circulating water through your chiller and another to circulating water through the building.

All of your chill water or condenser water pumps should have good seals, bearings, rotating components and drive motors. Both loops have controls, bypasses and valves that are often neglected for inspection and maintenance. The pump strainers should also be cleaned.

Standpipe, Sprinkler and Fire Pumps

Standpipe, Sprinkler and Fire Pumps

Standpipe systems are a series of pipe which connect a water supply to hose connections; an extension of the fire hydrant system designed to provide a pre-piped water system for building occupants or the fire department. Some older buildings only have standpipe systems while many newer buildings will have a combination system, which supplies the fire sprinkler system and the standpipe system, but of course –at Antler- we have the right products for your standpipe of combination needs.

Roof Tank Fill Pump

Roof Tank Fill Pump

A roof tank pump moves water into a tank located on or above the roof of a building. The water then returns to the building and is pressurized by gravity as it falls.

Booster Pumps

Booster Pumps

Booster Pumps are designed primarily for raw-water supply, pressure boosting, irrigation and dewatering use. The booster ensures a constant supply of fresh water and an integrated speed controller enables the booster to keep constant pressure in the pipe system. A pressure sensor, monitoring changes in the water consumption, will signal to the speed controller to change the motor speed to adapt performance to the new state. No external motor protection is required since the motor incorporates thermal protection against slow overloading and blocking.

And, as with all products:

We ship all products locally, regionally, and nationally, every day, and if ordered before noon, on the same day.

Service Coverage Map

  • Manhattan
  • Brooklyn
  • Queens
  • The Bronx
  • Staten Island
  • Westchester
service-coverage-map

Our Privacy Policy

Antler Pump & Motor Corporation (the “Company”) strives to ensure the highest standards for property listings and customer information privacy. Please review the following statement to learn about our company practices and policies. Please be aware that our Privacy Policy is subject to change at any time.

1. Purpose.

This Privacy Policy (“the Policy”) provides information on how the Company uses your personal information. By agreeing to the Policy, you agree to our collection and use of your personal information as described in the Policy. This Privacy Policy is effective for all new users of Sanitaryplumbing.com.

2. Personal Information.

You can browse some areas of Antler.nyc (“the Website”) without being a registered user. However, certain activities do require registration. (You consent to the transfer and storage of your information by registering with Antler.nyc). We may collect and store the following personal information:

  • Name, email, address, telephone number, and (depending on the service used), move-in dates;
  • Transactional information (such as lease terms, lease parties);
  • Computer sign-on data, statistics on page views, and traffic to and from the Website; and
  • Other information, including IP address and other web log information.

3. Use of Information.

Our primary purpose in collecting personal information is to provide you with a safe and user-friendly experience. For example, the Company may use your personal information to:

  • Improve our services and the Website’s content and layout;
  • Provide the services and necessary customer support you request;
  • Resolve disputes, collect fees, and troubleshoot problems;
  • Track and record customer satisfaction with our services;
  • Protect the Company against error and fraud;
  • Inform you of special promotions and announcements;
  • Enforce our agreements, terms, conditions, and policies; and
  • As otherwise described to you at the time of collection.

We may occasionally ask you to complete optional surveys. These surveys are used to improve and customize your experience with Sanitaryplumbing.com.

The Company always provides you the ability to opt-out of further communication such as promotions and surveys; see the Opt-Out section below.

The Company does not share any of your personal information with outside organizations, companies, individuals, etc. The only exception to this standard is if such a disclosure is reasonably necessary to respond to any and all legal processes.

4. Links to Other Sites.

The Website may have links to other websites that may collect personally identifiable information about you. The Company is not responsible for the privacy practices of the content of those linked websites.

5. Safety & Security Precautions.

The Website has strict security measures in place to protect you and your information from fraud. Once your information is provided to Antler Pump & Motor Corporation, we strive to ensure the confidentiality of your identity and information.

6. Opt-Out.

The Company provides you with the opportunity to opt-out of receiving promotional and other non-essential, marketing-related communications from Antler Pump & Motor Corporation. If you would like to opt-out of these select communications, please see any of the Company’s email communications and follow the directions indicated.

7. Account Protection.

Your password ensures the security of your account. When choosing a password, the Company suggests using various characters. It is highly recommended that you do not disclose your Sanitaryplumbing.com password to anyone. (If you do disclose your password or your personal information with others, you are responsible for all actions taken in the name of your account.) If the security of your password is compromised for any reason, please contact the Company immediately.

8. Accuracy of Information

The Company does not guarantee the accuracy of information for any and all of its properties on the Website, and is not responsible for any errors or misrepresentations (made by Renters, the Client, or otherwise).

9. Cookies

The Company may place a small cookie on your computer’s hard drive. This allows us to personalize your use on the Website. In order to maximize the functionality and usability of the Website, you must set your browser’s preferences to allow both permanent and temporary cookies.

10. Changing Your Personal Information.

Should your personal information change, please immediately update your information on the Website. This will ensure the accuracy of our records. The Company does retain personal information from closed accounts in order to comply with law and collect and disburse any fees owed.

11. Third Parties

This Privacy Policy addresses only the use of information we collect from you. Since Antler.nyc does not control the privacy policies of third parties, you are subject to the privacy policies of those third parties. It is advisable that you consult with the management of third parties before you disclose your personal information to others.

12. General

We may amend this Privacy Policy at any time by posting the amended terms on the Website. All amended terms are immediately effective after they are initially posted on the Website.

13. Privacy Policy Questions & Concerns

Questions and/or concerns regarding the Policy should be emailed to the following email address: info@antler.nyc.